Welcome
Internet Links
Intallers News
Survey
Installer Billing
HD Process
General Info
FAQ e-mail me


Frequently Asked Questions
Here are a some frequently asked questions to troubleshoot your door operation.

Why doesn't my storm door close all the way?
Why does my storm door close too fast or too slow?
Why did the closer pull out of my storm door?
Why is the push button closer on my storm door stuck open?
Do I need a wind chain for my storm door?
Where do I find my serial number on my Andersen storm door?




Why doesn't my storm door close all the way?

There are 2 possible reasons for this:

1. Your storm door closers need to be readjusted; this occurs from time to time due to weather changes, humidity, etc. Locate the screw at the end of the closer, open door and let it close to note the current closing speed. Using a philips head screwdriver adjust closer to desired speed (left for faster and right for slower).

2. Storm doors today are more efficient then they were years ago. On some models, a pocket of air is created between the storm door and the entry door. When the storm door is closing and the entry door is closed this creates a cushion of air that does not allow the storm door to close all the way. With the entry door open the storm door will close correctly, or when the screen is in the storm door instead of the glass, the storm door will close correctly. There is no action to be taken when this occurs other than altering the efficiency of the storm door (removing bottom weatherstripping and top felt).

Back to Top

Why does my storm door close too fast or too slow?

Your storm door closer needs to be readjusted; this occurs from time to time due to weather changes, humidity, etc. Locate the screw at the end of the closer, open door and let it close to note the current closing speed. Using a philips head screwdriver adjust closer to desired speed (left for faster and right for slower). This is normal customer maintenance.

Back to Top

Why did the closer pull out of my storm door?

Probable causes: The wind or another outside force has caught your storm door and has forced it open. This could have been due to the storm door not being latched or secured which is the customer's responsibility and is incidental or consequential damage, which is NOT covered by the limited warranty, Home Depot, and/or Mac Window Systems. You should turn this in to your homeowner's insurance.

Back to Top

Why is the push button closer on my storm door stuck open?

Probable cause: You are trying to push down or pull up on the bottom to release the closer. Push open the door a few inches wider than its set position, this will release the closer's push button. Let go of door and let it close freely.

Back to Top

Do I need a wind chain for my storm door?

According to Andersen/Emco All Season Doors, the answer is NO. Their testing indicates that if the wind is strong enough to pull the closers out of the storm door or door jambs, the wind chain will almost certainly also fail, causing more damage to the storm and door jamb than if it were not present. Care should be taken when operating the door in windy conditions.

Back to Top

Where do I find my serial number on my Andersen storm door?

Locate the serial number on the hinge side of the door. Every storm door has a silver tag on the hinge edge of the storm door, which contains the door's unique serial number.

Back to Top


|Welcome| |Internet Links| |Intallers News| |Survey| |Installer Billing| |HD Process| |General Info| |FAQ|

Copyright 1999-2004. Positive Software Corporation. All rights reserved